All Products

This bronze or brass bushing is pressed into the hole in the bell housing of the transmission and provides support to the starter shaft when the starter is installed in a manual transmission vehicle. This bushing must be used with all shaft type starters similar to SR15N. Starter Bushing, 11330..

This bronze or brass bushing is pressed into the hole in the bell housing of the transmission and provides support to the starter shaft when the starter is installed in a manual transmission vehicle. This bushing must be used with all shaft type starters similar to SR11N. Starter Bushing,..

This IMI Performance Products Hi-Torque starter is a 1.2kW genuine Nippon Denso starter motor with a 4.44 to 1 gear ratio and can be re-indexed to fit the Volkswagen Bug, Super Beetle, Ghia, Bus, Type 3 and Thing. This starter is 12 Volt and has a 9 tooth(small diameter) gear for the 200mm 12 Volt V..

This IMI Performance Products Hi-Torque starter is a 1.2kW genuine Nippon Denso starter motor with a 4.44 to 1 gear ratio and can be re-indexed to fit the Volkswagen Bug, Super Beetle, Ghia, Bus, Type 3 and Thing. This starter is 12 Volt and has a 9 tooth(small diameter) gear for the 200mm 12 Volt V..

This brand new 12 Volt starter made by Bosch. This is a much smaller and lighter version of the old stock replacement for the Bug '67-'77, Super Beetle '71-'79, Ghia '67-'74, Bus '67-'75, Type 3 '67-'73 and Thing '73-'74. This starter is compatible with manual transmissions when using a 12 Volt, 200..

This is a new 12V starter for manual transmission vehicles that requires the starter bushing in the bell housing on the transmission. Installation Note: To use this starter on vehicles earlier than 1967 the vehicle must have been converted to 12V and the starter bushing in the bell housing..

This IMI Performance Products Super Hi-Torque starter is a 1.4kW genuine Nippon Denso starter motor with a 4.44 to 1 gear ratio and can be re-indexed to fit the Volkswagen Bug, Super Beetle, Ghia, Bus, Type 3 and Thing. This starter is 12 Volt and has a 9 tooth(small diameter) gear for the 200mm 12 ..

This IMI Performance Products Hi-Torque starter is a 1.4kW genuine Nippon Denso starter motor with a 4.44 to 1 gear ratio and can be re-indexed to fit the Volkswagen Bug, Super Beetle, Ghia, Bus, Type 3 and Thing. If you have converted your car to 12 Volt and still have a 6 Volt transmission and fly..

This IMI Performance Products Hi-Torque starter is a 1.4kW genuine Nippon Denso starter motor with a 4.44 to 1 gear ratio and can be re-indexed to fit the Volkswagen Bug, Super Beetle, Ghia, Bus, Type 3 and Thing. If you have converted your car to 12 Volt and still have a 6 Volt transmission and fly..

Steering box seal for the steering shaft input, 24mm OD, 16mm IDSteering Box Seal, Input Shaft, 24x16x7mm, Sold ea...

Steering box seal for the pitman arm shaft, 37mm OD, 24mm IDSteering Box Seal, 311415297, Pitman Arm Shaft, 37x24x7mm, Sold ea...

STEERING BOX T-1 62-77..

New replacement steering box for 62-77 Bug, 62-74 Ghia and 61-73 Type 3. Steering box ONLY clamp and pitman arm sold separately.   Application Note: Will fit '49-'60 Bug and Ghia but you must use 113415371 pitman arm. Will NOT fit Super Beetle.  Steering Box, 113415061C, New, Sold ea...

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

This metal bearing/bushing fits between the steering column tube and the steering shaft behind the steering wheel to help reduce the side to side movement.  Steering Column Bushing, Column to Shaft, Metal, Sold ea...

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

This plastic and metal bearing/bushing fits between the steering column tube and the steering shaft behind the steering wheel to help reduce the side to side movement.  Steering Column Bushing, Column to Shaft, Metal, Sold ea...

This metal bearing/bushing fits between the steering column tube and the steering shaft behind the steering wheel to help reduce the side to side movement.  Application Note: This bearing fits early 74 and has an inside diameter of 24mm. Please verify your application before purchase to en..

This metal bearing/bushing fits between the steering column tube and the steering shaft behind the steering wheel to help reduce the side to side movement.  Steering Column Bushing, Column to Shaft, Metal, Sold ea...

This metal bearing/bushing fits between the steering column tube and the steering shaft behind the steering wheel to help reduce the side to side movement.  Application Note: This bearing fits late 74 and has an inside diameter of 22mm. Please verify your application before purchase to ens..

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

This plastic bushing fits between the steering column tube and the steering shaft behind the steering wheel to help reduce the side to side movement.  Steering Column Bushing, Column to Shaft, Plastic, Sold ea...

Steering Column Horn Wire Plug..

This rubber bushing fits over the steering column tube to isolate the tube from the body and is located lower end near the pedal cluster.  Steering Column Tube Bushing, Column to Firewall, Rubber, Sold ea...