All Products

The torque multiplier helps tightening and removing the gland nut on 6 volt and 12 volt flywheels. It also help in removing and tightening the axle nut on 5x205 and 4x130 brake drums. The multiplier includes a 6 volt and a 12 volt gear drive for flywheels and a bolt on plate for use with brake drums..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable polyurethane.  Installation Note: The stock torsion arm seal can not be us..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable high quality polyurethane by Prothane for Bugpack and includes a tube of Polyurethane Lub..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable high quality polyurethane by Prothane for Bugpack and includes a tube of Polyurethane Lub..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable polyurethane.  Installation Note: The stock torsion arm seal can not be us..

The strength and durability of Urethane will out-last and out-perform standard rubber products in every application. From Shift Couplers to Bump Stops, install Urethane and never look back! All Urethane is red in color except where noted.Position(s): Front, Left or RightApplication Note: Thi..

These Torsion Springs are for use with Narrowed Adjustable Ball Joint Axle Beams. Two Torsion Spring sets are required per Axle Beam. Torsion Spring Set, 22-2852-0, Narrowed, Ball Joint, Upper or Lower, EMPI, Sold as Set..

Tow Bar Pins, Long Style, w/Clips, Sold in Pair..

Prevents wheel hop and engine flex by supporting rear of engine.  Installation Note: This device requires drilling of the body to mount the brackets.   Application Note: This is considered a universal part and can fit many different applications based on modifications to the ve..

An original design from Bug Pack to eliminate drilling. This brace kit is designed to take the weight and torque of the engine and transmit it to the chassis. Eliminates suspension windup and wheel hop. Simple bolt-on installation and finished with a chrome plated bar and zinc plated hardware. ..

Replacement rubber bushing for the rear trailing arm pivot point. Trailing Arm Pivot Bushing, IRS, Left or Right, Sold ea...

Replacement rubber bushing for the rear trailing arm pivot point. Application Note: This is designed for '68 model cars with IRS rear suspensions. Please verify your application before purchase to ensure this part is correct for your project. Trailing Arm Pivot Bushing, IRS, Left or Right,..

These new Urethane a-arm bushings are designed to replace the inner sleeve and rubber cushion section of the bushing. This prevents vertical motion at the pivot point which is greatly magnified at the end of the arm, altering any carefully planned alignment. Kit comes complete with four bushings and..

Another problem area solved with this slick suspension item. These new Urethane a-arm bushings are designed to replace the inner sleeve and rubber cushion section of the bushing. This prevents vertical motion at the pivot point which is greatly magnified at the end of the arm, altering any carefu..

Secures a Type 1 transmission from the bottom of the front case bolts. Supports from under the frame horns to reduce upwards flex and reduce loads on the front transmission mount, zinc plated. Urethane stops included.  Application Note: This is considered a universal part and can fit ..

This tool can be used for the transmission drain plug as well as the fill plug on the VW transmission. Additionally this tool can be used for the pivot bolt on late model IRS chassis. Tool attaches to a 3/8in drive ratchet.  Transmission Drain Plug Socket, 00-5773-0, 17mm, 3/8in. Drive, EM..

This Allen wrench is designed for the transmission fill and drain plugs but will also fit the pivot bolts on late model IRS suspensions.  Transmission Drain Plug Wrench, 17mm, Sold ea...

Facilitate the seamless integration of a complete synchromesh 61-72 transaxle into pans designed for 52-59 models. Easy bolt-on installation, includes hardware.Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. App..

Transmission Mount, Stock, Rear, Left or Right, Sold ea...

High quality OE Volkswagen rubber transmission mount for the rear cradle. Transmission Mount, 113301263OE, Stock, Rear, Left or Right, OE VW, Sold ea...

These robust steel mounts serve as a superior alternative to the standard rubber mounts, effectively eradicating any undesirable flex and wheel hop. This proactive solution mitigates the risk of transmission issues, including nose cone breakage and mount fractures, commonly experienced in off-road a..